The heart of the Freedom Series 2100 is the control center unit. In includes the standard Series C HMCP Motor Circuit Protector, Freedom Starter, and other components. The control unit center has been designed for durability, safety and ease of installation and maintenance.Guide rails, mounted in the motor control center structure, provide for easy insertion or drawout. Two mounting points on each side of the unit engaged the rails located near the top of each unit space, providing minimum friction. They also provide precise alignment to the unit for accurate staving on the vertical bus.Safety is enhanced with a latch that securely holds the unit in the structure. The latch can only be engaged when the stabs are fully mated to the vertical bus. Upon partial withdrawal for inspection or maintenance, the Series C HMCP Motor Circuit Protection is standards in Series 2100 motor starter units
latch can be re-engaged to prevent the unit from being stabbed to the bus or removed from the structure. Each cell is provided with the standard double ground system for maximum operator an maintenance personnel safety.
After fabrication, the control center unit wrapper is cleaned and powder coating. The white color increases visibility within the unit to facilitate wiring and maintenance. Additionally, the wrapper provides ample space for cable entry from the wireway to the unit.
- Operating Handle
- Short Circuit Protective Device
- Stab Assembly
- Unit Drawout of top rail
The easily operated handle mechanism is mechanically connected to the circuit breaker providing accurate alignment and visual indication of the circuit protector status including on, off and tripped.
- Motor Starter
- Terminal Blocks
- Control Transformer
- Primary / Secondary Fuse Holder
Exclusive modular pull-apart terminal blocks provide for easy installation and maintenance. The removable portion can be wired outside of the vertical wireway and then easily installed.
- Pivot Tube
- Control Devices
- Device Panel
Reviews
There are no reviews yet.